Maritime Knowledge Base
Browse questions and answers across marine machinery, merchant navy careers, shipboard operations and maritime glossary terms.
Browse by Category
Marine Machinery
Troubleshooting guides for pumps, boilers, purifiers, compressors and auxiliary systems.
Merchant Navy Careers
Questions about joining the merchant navy, exams, cadetships, ranks and sea-time.
Maritime Glossary
Plain-English definitions of shipping, engine-room, navigation and regulatory terms.
Shipboard Operations
Practical Q&A for watchkeeping, safety, maintenance routines and onboard documentation.
Results for "Bilge"
What should be checked during engine-room watchkeeping rounds?
How to make an engine-room round count — comparing live readings against normal ranges and catching trends before they become failures.
Marine MachineryWhy does the oily water separator 15 ppm bilge alarm keep activating?
The 15 ppm alarm on the oily water separator stops overboard discharge when the oil content is too high — the causes lie in the separator, the monitor or the feed.
Marine MachineryHow does a marine incinerator work and what can it burn?
A marine incinerator burns the ship's waste oils, sludge and solid garbage in a combustion chamber, subject to MARPOL rules on what may be incinerated and where.
Marine MachineryHow does a marine centrifugal pump work?
A centrifugal pump moves liquid by spinning it with an impeller, which throws the liquid outward and converts its speed into pressure — the most common type of pump aboard ship.
Marine MachineryWhy does a marine centrifugal pump lose suction or stop pumping?
A centrifugal pump that loses suction has usually lost its prime or drawn in air — the causes lie in air leaks, blocked suctions, low levels and cavitation.
Shipboard OperationsWhat is under keel clearance and why is it important?
Under keel clearance is the vertical gap between the lowest point of a ship's keel and the seabed — a safety margin that must be maintained to avoid grounding.
