Maritime Knowledge Base
Browse questions and answers across marine machinery, merchant navy careers, shipboard operations and maritime glossary terms.
Browse by Category
Marine Machinery
Troubleshooting guides for pumps, boilers, purifiers, compressors and auxiliary systems.
Merchant Navy Careers
Questions about joining the merchant navy, exams, cadetships, ranks and sea-time.
Maritime Glossary
Plain-English definitions of shipping, engine-room, navigation and regulatory terms.
Shipboard Operations
Practical Q&A for watchkeeping, safety, maintenance routines and onboard documentation.
Results for "Air receiver"
What should be checked during engine-room watchkeeping rounds?
An engine-room round compares readings, sounds and smells with normal values for the current load, logs real figures and spots trends before alarms do.
Marine MachineryWhy won't my marine air compressor build pressure?
A compressor that runs but won't fill the receiver usually has leaking valves. Next check the unloader, drains, leaks, cooling, intake filter and piston rings.
Marine MachineryWhy won't the main engine start on air?
A main engine that won't start on air usually has a starting air fault, a fuel problem or a blocking interlock such as the turning gear or an unreset shutdown.
Marine MachineryWhat causes a marine engine turbocharger to surge?
Turbocharger surging is a brief reversal of airflow in the compressor, usually caused by fouling in the air or gas path or by sudden changes in engine load.
Marine MachineryHow does a marine engine turbocharger work?
A turbocharger uses exhaust gas to spin a turbine that drives a compressor, pushing extra air into the cylinders so the engine can burn more fuel.
Marine MachineryHow does a marine air compressor work and why is it needed?
A marine air compressor compresses air in two stages with cooling between them, filling receivers to about 30 bar, mainly to start the ship's diesel engines.
Marine MachineryHow does a ship's refrigeration plant work?
A ship's refrigeration plant uses the vapour-compression cycle to pump heat out of provision rooms or cargo spaces and reject it to seawater or cooling water.
Marine MachineryWhat is the difference between a controllable-pitch and a fixed-pitch propeller?
A fixed-pitch propeller has blades set at one angle. A controllable-pitch propeller turns its blades to vary thrust and go astern without reversing the shaft.
Marine MachineryWhat is scavenging in a two-stroke marine engine?
Scavenging is how a two-stroke engine clears exhaust gas from the cylinder and refills it with fresh air near bottom dead centre, before the next compression.
