Maritime Knowledge Base
Browse questions and answers across marine machinery, merchant navy careers, shipboard operations and maritime glossary terms.
Browse by Category
Marine Machinery
Troubleshooting guides for pumps, boilers, purifiers, compressors and auxiliary systems.
Merchant Navy Careers
Questions about joining the merchant navy, exams, cadetships, ranks and sea-time.
Maritime Glossary
Plain-English definitions of shipping, engine-room, navigation and regulatory terms.
Shipboard Operations
Practical Q&A for watchkeeping, safety, maintenance routines and onboard documentation.
Results for "Throughput"
What should be checked during engine-room watchkeeping rounds?
An engine-room round compares readings, sounds and smells with normal values for the current load, logs real figures and spots trends before alarms do.
Marine MachineryWhy is my fuel or oil purifier not separating properly?
Poor purifier separation usually comes from overfeeding, low feed temperature, the wrong gravity disc, a lost water seal or a dirty bowl. Check them in order.
Maritime GlossaryWhat is a TEU?
TEU explained — the twenty-foot equivalent unit used to measure container-ship capacity and container throughput.
Marine MachineryWhy does the oily water separator 15 ppm bilge alarm keep activating?
A 15 ppm alarm means the separator is passing too much oil or the monitor is misreading. Usual causes are emulsions, a dirty coalescer and a fouled cell.
Marine MachineryWhat is the difference between a purifier and a clarifier?
A purifier removes water and solids from oil and has a water outlet. A clarifier removes only solids, has no water outlet and suits oil with very little water.
Marine MachineryHow does a ship's fuel oil system store, clean, heat and deliver fuel to the engines?
Fuel goes from bunker tanks to a settling tank, through centrifugal separators to the service tank, then is heated to the right viscosity and pumped to engines.
