Skip to content

Maritime Knowledge Base

Browse questions and answers across marine machinery, merchant navy careers, shipboard operations and maritime glossary terms.

Browse by Category

Results for "Sulphur"

Marine Machinery

What causes a scavenge fire in a two-stroke marine engine?

A scavenge fire starts when oil and carbon in a two-stroke engine's scavenge space are ignited, usually by hot gas blowing past worn or stuck piston rings.

Shipboard Operations

What is an inert gas system on a tanker and why is it needed?

An inert gas system fills a tanker's cargo tanks with low-oxygen gas so the vapour inside cannot burn, keeping tank oxygen at 8% by volume or less.

Marine Machinery

Why does the auxiliary boiler flame keep failing or the burner keep tripping?

Repeated flame failure trips mean the scanner keeps losing the flame, usually because of poor fuel or atomisation, weak ignition, wrong air or a dirty scanner.

Marine Machinery

How does a marine diesel engine work?

A marine diesel engine ignites fuel by compressing air until it is hot enough to burn it. How the two-stroke and four-stroke engines used at sea differ.

Marine Machinery

What is cylinder lubrication in a two-stroke marine engine?

Cylinder lubrication is the separate oil supply fed onto the liner of large two-stroke engines to lubricate, neutralise fuel acids and keep the surfaces clean.

Marine Machinery

What is jacket cooling water in a marine engine?

Jacket cooling water is treated fresh water pumped around a diesel engine's cylinder liners, heads and exhaust valves to remove heat at a steady temperature.

Marine Machinery

How does a ship's fuel oil system store, clean, heat and deliver fuel to the engines?

Fuel goes from bunker tanks to a settling tank, through centrifugal separators to the service tank, then is heated to the right viscosity and pumped to engines.